It happens quite a bit when you have an iPad and it becomes stuck on the apple logo. Sometimes it can be fixed, but often times it is very difficult to remove and no matter what you do, it seems to come right back on. Hopefully, you will never have to deal with this problem. But, what should you do if your iPad becomes stuck on an Apple logo?
The first thing that you should do is take the iPad out of the packaging. Usually, this is easy enough to do and you can simply take the iPad out with some plastic protection over the logo and let it slide down inside the case. If it is glued down too tightly, you can try to pry it loose from the inside of the case.
If this method does not work, the next thing that you can do if your iPad becomes stuck on an Apple logo is to take it out of the packaging and lay it down flat on a soft surface. Make sure that you are not touching any part of the screen with your hands. This will keep the liquid away from any of the sensitive parts of the screen, which is typically what causes the problem in the first place.
You may want to try taking it apart before you do anything else. If the logo has become stuck in the case, there is a good chance that the only way to remove it is to take it apart. To do this, lay the iPad on a flat surface with the bottom resting on a non-slip mat. Peel back the protective film from the top and then use an opening tool to pry the two halves of the logo off. Again, it is a good idea to lay something under the iPad if you want to prevent damage.
You may be tempted to try a few home remedies before you go the commercial route. However, many of these methods can damage the device even further and they may not even remove the stuck logo. Some people even put Tylenol and other pain relievers into the case thinking that it will loosen the glue holding it in place. If you are considering this as a way to remove your iPad, you should know that you have a few options.
One of the least expensive ways to try to remove it is through the use of a hairdryer. All you will need is a handheld hairdryer and you can heat up the hair in order to dry it. Using the hairdryer on the logo for a few minutes will often result in some of the adhesive showing through. Once it does, simply rub the rest of the adhesive away with a toothbrush or a towel until there is no more adhesive. You may also try to heat up a small oven chip using your hairdryer. Do not use the ice cubes provided in the box; these will actually do more damage than good since they are too cold to be effective.
Another cheaper and slightly less effective way to remove your stuck Apple iPad is through the use of liquid nitrogen. This can be done at your local grocery store or by searching online. In order to do this, you must have access to a portable air compressor and the cleanest area to apply the solution. It is important to wear protective clothing such as rubber gloves in order to avoid any of the chemicals getting onto your skin.
You can use either method in order to remove your iPad from the package. Before you start applying either method, you must read all of the instructions carefully. These are especially important if you are trying to remove an iPhone instead of an iPad. Follow all recommendations and you should be able to remove your stuck device in no time.
Leave a Reply
You must be logged in to post a comment.