How to clean your air ducts can be a bit complicated. It’s likely that you’ve seen pictures or have had friends who have had their homes checked by an HVAC professional and may have found that there is a lot of accumulated filth in the air ducts. That is because it is a fact that ducts become clogged with dirt and hair every now and then, so keeping them clean can actually be difficult for most people. Luckily, if you learn how to clean air ducts yourself, this particular task doesn’t take long to complete. You can even do it on a weekend without having to spend any money to get it done.
First things first, you need to locate the exact location where your air ducts are. This should be easy to figure out as there are usually signs at the location that indicates this. If you don’t see any signs, you can find these on the outside of the ducts, near where the air compressor is. Once you have located where your air ducts are located, it will be easier to clean them.
Next, you’ll need to unplug the system. However, before you do this, you should turn off the power to the home. This is especially important if you have central air conditioning as the system will be connected to the power, which could cause an explosion if the power is turned off. While you’re preparing to remove the old filter, you should also check the blower fan that is currently in place. If it is not properly installed, then the air duct won’t work effectively. You should also check the filters to make sure that they are not clogged with any debris.
Once you have taken all the needed steps to clean your air ducts, you should turn the air compressor back on. Since you ran some sort of cleaning agent through the ducts previously, there should already be a little bit of solution left in the filter. When you are ready to start the process, you will need to attach the new filter and snap the end of the air ducts in place.
Next, you will want to read the instructions that came with your air ducts to find out how to clean them. The most common way to clean an air duct is to spray the inside of it using a hairdryer or heat gun. This will loosen the build-up on the filter and let you start cleaning the inside. Once you are done, you can replace the filter and let it dry. The goal is to eliminate the dust and other materials that may have gathered inside the air duct.
One popular way to clean your ducts is by using a pressure washer. This works especially well if you have seriously accumulated dirt or debris on the air ducts. Be sure to wear protective gloves and old shirts when using these tools because you do not want anything you come into contact with to get contaminated. This is especially true when using strong jets of water to clean the dirty air ducts. The best thing about these pressure washers is that they do not require you to open up your home or business to perform the task. You can easily hose off the dirt and debris in no time.
If you do not have a lot of extra money to spend on hiring someone to clean your air ducts for you, then you can also learn how to clean them on your own. There are many different products available for homeowners who need to know how to clean their air ducts. These products are designed to safely clear away all of the built-up materials that are in the air ducts. Although they may seem like a time-consuming project, they can actually save you money in the long run since you will not have to pay for expensive repairs.
Finally, if you need to know how to clean your air ducts because they are dirty from mold and insects, then you should consider purchasing an insect air cleaner. These air cleaners work by picking up the bugs and other insects that are in your ductwork. They then release a detergent that helps to wash away the mold and grime from your system. It is a simple and easy solution for dealing with unsanitary air.